Australian orders over $350 and NZ orders over $400 receive free shipping

Manufacturers


Branches


$AUD63.25

Add to Cart:


  • Description
  • Details
  • Reviews

The Colour de Verre blossoms and leaves might be beautiful, but the lifelike twigs created by this mould tie a larger design together. On the back of the mould is a slumper that makes the castings undulate just like real twigs.

The mould measures approximately 12.7 cm x 22.22 cm x 3.17 cm. There are three designs within the mould which have respective fill weights of 7, 23 and 32 grams - this is the amount of glass required to fill the moulds properly.

For best effect, Colour de Verre recommends the use of frit, at least 50% of which should be clear (otherwise the castings will be very dark).  To see our range of fine frits, click here.

IT SHOULD BE NOTED THAT FOR BEST EFFECT, COLOUR DE VERRE SPECIFICALLY RECOMMENDS THE USE  OF HOTLINE PRIMO PRIMER (OR MR-97, WHICH IS NOT CURRENTLY AVAILABLE IN AUSTRALIA). 

Give the mould 3-4 thin, even coats of Primo Primer kiln wash, using a soft artist's brush to apply the Primer (Colour de Verre recommends that you do NOT use a haik brush, as this will not pick up the necessary fine detail).  Use a hair dryer to completely dry each coat before applying the next.

Colour de Verre suggests a firing temperature of approximately 735ºC (1350ºF) for COE 96 and 750ºC (1375ºF) for COE 90.

  • Model: CDV-branches
  • Shipping Weight: 1.2kgs
  • Manufactured by: Colour De Verre

Be the first to write a review.  Write a Review.

Branches

Branches

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock