Sheet Glass orders over $200.00 and NZ sheet glass orders over $250 ship free

Manufacturers


Beach Shells - Small


$AUD63.25

Add to Cart:


  • Description
  • Details
  • Reviews

Colour de Verre has a wide variety of designs inspired by the sea.

This mould makes the four smallest shells. They can be used alone or with, for example, the medium sized Beach Shells, Seahorse, Starfish, and Tropical Fish moulds.

The mould measures approximately 13.97 cm x 13.97 cm x 3.17 cm.  The fill weight for the starfish is 8 grams; the scallop, 18 grams; the clam, 10 grams; and the whelk, 7 grams - this is the amount of glass required to fill the moulds properly.

For best effect, Colour de Verre recommends the use of frit, at least 50% of which should be clear (otherwise the castings will be very dark).  To see our range of fine frits, click here.

IT SHOULD BE NOTED THAT FOR BEST EFFECT, COLOUR DE VERRE SPECIFICALLY RECOMMENDS THE USE  OF HOTLINE PRIMO PRIMER (OR MR-97, WHICH IS NOT CURRENTLY AVAILABLE IN AUSTRALIA). 

Give the mould 3-4 thin, even coats of Primo Primer kiln wash, using a soft artist's brush to apply the Primer (Colour de Verre recommends that you do NOT use a haik brush, as this will not pick up the necessary fine detail).  Use a hair dryer to completely dry each coat before applying the next.

Colour de Verre suggests a cooler than usual firing temperature of about 1290-1310ºF (700-710ºC) for COE 96 and 25ºF (10ºC) hotter for COE 90.  The lower temperatures of this firing schedule will preserve the design's delicate edge detail and keep the glass from balling.

 

  • Model: CDV-beach shells small
  • Shipping Weight: 1.2kgs
  • Manufactured by: Colour De Verre

Be the first to write a review.  Write a Review.

Beach Shells - Small

Beach Shells - Small

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock