Australian orders over $350 and NZ orders over $400 receive free shipping

Manufacturers


Maple Leaves


$AUD63.25

Add to Cart:


  • Description
  • Details
  • Reviews

This mould creates two sizes of maple leaves. On the mould's reverse side are two built-in slumpers. The finished castings can be used to embellish other, larger works or can be slumped into small bowls for appetizers or elegant salt cellars.

The fill weight of the leaves is 60 and 40 grams respectively - this is the amount of glass required to properly fill the moulds.  The dimensions of the leaves are 76 mm and 101 mm respectively.

For best effect, Colour de Verre recommends the use of frit, at least 50% of which should be clear (otherwise the castings will be very dark).  To see our range of fine frits, click here.

IT SHOULD BE NOTED THAT FOR BEST EFFECT, COLOUR DE VERRE SPECIFICALLY RECOMMENDS THE USE  OF HOTLINE PRIMO PRIMER (OR MR-97, WHICH IS NOT CURRENTLY AVAILABLE IN AUSTRALIA). 

Give the mould 3-4 thin, even coats of Primo Primer kiln wash, using a soft artist's brush to apply the Primer (Colour de Verre recommends that you do NOT use a haik brush, as this will not pick up the necessary fine detail).  Use a hair dryer to completely dry each coat before applying the next.

 

 

  • Model: CDV-maple
  • Shipping Weight: 1.2kgs
  • Manufactured by: Colour De Verre

Be the first to write a review.  Write a Review.

Maple Leaves

Maple Leaves

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock